int_0125

 

Application:

The controller is designed for implementation in sewage water purification stations. It provides an air treatment during preliminary fixed and programmed time periods, as it is to be connected in the compressor circuit. In this way the controller provides a vital environment for micro-organisms and bacteria reproduction, which remove the water impurities.

 

 

Type 1
Technical data:
  • Equipped with five outputs for a control of four magnetic valves and one compressor;
  • Opportunity for an adjustment of a time period for open and closed state of each magnetic valve within 1-99 minutes;
  • STOP regime;
  • Maximum current trough the contact – 1A for valves and 3A for the compressor;
  • Warranty period of 24 months.

 

Have a look at the complete “User’s guide (BG)” of the Controller for sewage water purification INT0125.
(.PDF 304kB)

 

 

Type 2
Technical data:
  • Equipped with five outputs – four electronic contacts and one relay;
  • A choice of four modes. Accordingly, 6, 8, 16 and 24 hour work cycle;
  • Set in two time intervals (time on and off) for each output;
  • Maximum current trough the contact – 1А and 3А for the relay;
  • Warranty period of 24 months.

 

Have a look at the complete “User’s guide (BG)” of the Controller for sewage water purification INT0125.
(.PDF 474kB)