Application: The Device is designed to manage the operation of solid fuel boilers, equipped with a fan and or auger for force feeding of air to the burning chamber. The main principle of operation is based on the regulation of feed air, by means of regulation of fresh air fan speed in relation to outlet boiler water temperature, the state of the room thermostat and the temperature of flue gas fan in case it is installed.There...

    Application: The simulator is designed for installation in automobile gas systems. It simulates the pressure of the fuel pump and the fuel temperature.   Technical data: Power system voltage 12V/DC Maximum current consumption 20mA Output Voltage / orange wire / from 0 to 10V Output Impedance / blue wire / 30k – +10%. Protection level IP-65 Operating temperature range from -10C to +55 C Humidity of the environment up to...

  Application: Safety switch of the fuel is designed for installation in machines with internal combustion engines for not allowing leakage of liquid or gas fuel when the engine turns off.   Technical data: Power system voltage 12V/DC Maximum output current 15A Time delay 3 sec. Protection level IP-20 Operating temperature range from -10C to +55 C Humidity of the environment up to 80% Warranty period of 24 months.      ...

  Application: Fuel level reset module is designed for installation in Auto gas equipment to reset the measurement of the fuel during certain period of time.     Technical data: Power system voltage 12V/DC Protection level IP-65 Time OFF state 7 to 8 min. Time ON state 55 to 65sec. Operating temperature range from -10C to +55 C Humidity of the environment up to 95% Warranty period of 24 months.       Fuel level reset...